61 13... Circular connector, 13-pin, system D2.5

Special tools required:

Pull off rubber grommet (1).

Carefully pull out lock (2) in direction of arrow.

Fig 1: Pulling Out Lock In Specified Direction

Courtesy of BMW OF NORTH AMERICA, INC.

Move lower section of connector (3) in direction of arrow until retaining lugs (4) snap into release groove (5).

Fig 2: Moving Lower Section Of Connector In Specified Direction

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 , press down retaining lugs (6) of corresponding contact and pull out cable.

Fig 3: Pressing Down Retaining Lugs Using Special Tool (61 0 303)

Courtesy of BMW OF NORTH AMERICA, INC.