Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Propeller Shaft CV Joint Heat Shield

Courtesy of GENERAL MOTORS CORP.

Install the front propeller shaft CV joint heat shield (2) to the vehicle.
Inspect the front propeller shaft CV joint heat shield bolts (1). Replace if damaged or worn.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the front propeller shaft CV joint heat shield bolts (1).
Tighten: Tighten the front propeller shaft CV joint heat shield bolts to 9 N.m (80 lb in).
Lower the vehicle.