FixVault
Home › Chevrolet › 2009 › HHR SS, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 7 (Shift Lock Control System) › Diagnostic Information and Procedures › Transmission Control Lever Malfunction › Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Install a 10A fused jumper wire between the control circuit terminal B and 12 volts. Install a jumper wire between the ground circuit terminal D and ground.
  2. Listen for the solenoid to turn ON and OFF.
    • If the function does not perform as specified, replace the shift lock control solenoid.
About FixVault