FixVault
Home › Chrysler › 2009 › 300 LX › Repair and Diagnosis › Engine Performance › Ignition System › Ignition Control (Service Information) › SENSOR, Knock › Removal › 3.5L

SENSOR, Knock: Removal: 3.5L

Fig 1: KNOCK SENSOR ELECTRICAL CONNECTOR
GC0080082Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the upper intake manifold. Refer to REMOVAL .
  3. Disconnect the electrical connector.
    Fig 2: KNOCK SENSOR LOCATION
    GC0095241Courtesy of CHRYSLER LLC
  4. Remove the knock sensor.
About FixVault