Guideline Setup

This diagnosis adjusts the guide line of the rearview camera image. This is for factory use only.

NOTE: Do not change the shift lever to R while this diagnosis runs.

Select view mode in the Guideline Setup menu.

Fig 1: Guideline Setup Menu Screen

Courtesy of AMERICAN HONDA MOTOR CO., INC.

If the ALL Points is selected, all guide lines can be adjusted at the same time.
If the Default is selected, all guide lines can be reset for the factory settings.
For returns to the previous screen, select the CANCEL or push the CANCEL button.

Fig 2: Guideline Setup Factory Screen (1 Of 2)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Using the interface dial to adjust the point(s).

Fig 3: Guideline Setup Factory Screen (2 Of 2)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

If you want to keep the setting, select Save. Each coordinates of the guide line is displayed.

Fig 4: Guideline Setup Change Result Screen

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Select the Exit and the guide line adjust ends (returns to the Guideline Setup menu screen).