Repair Procedures: Removal

Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "AIR CLEANER ")
Remove the battery and tray.
(Refer to Engine Electrical System - "BATTERY ")
Remove the clutch actuator.
(Refer to Dual Clutch Control System - "CLUTCH ACTUATOR ")
Disconnect the input shaft speed sensor (A).

Fig 1: Locating Input Shaft Speed Sensor
Courtesy of HYUNDAI MOTOR AMERICA
Remove the input shaft speed sensor after removing the bolt (A-2ea).

Fig 2: Locating Input Shaft Speed Sensor Bolts

Courtesy of HYUNDAI MOTOR AMERICA

Fig 3: Locating Input Shaft Speed Sensor 2

Courtesy of HYUNDAI MOTOR AMERICA