FixVault
Home › Hyundai › 2025 › Kona N Line, 4WD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 1.6 › Purge Control Solenoid Valve (PCSV) › Inspection

Purge Control Solenoid Valve (PCSV): Inspection

  1. Turn the ignition switch OFF.
  2. Disconnect the Purge Control Solenoid Valve (PCSV) connector.
  3. Measure resistance between the Purge Control Solenoid Valve (PCSV) terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "SERVICE INFORMATION "

About FixVault