FixVault
Home › Isuzu › 2004 › Ascender Limited, 5.3 P, RWD › Repair and Diagnosis › Engine Performance › System › Engine Controls (Introduction) - 5.3L › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor Electrical Connector
    GM899743Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor.
  2. Close the retaining clip.
  3. Connect the fuel tank pressure sensor electrical connector (3).
  4. Lower the vehicle.
About FixVault