FixVault
Home › Isuzu › 2007 › Ascender RWD › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Bracket Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Steering Pump Bracket & Mounting Bolts
    GM1201382Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pump bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the power steering pump bracket mounting bolts.

    Tighten:  Tighten the power steering pump mounting bolts to 50 N.m (37 lb ft).

  3. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  4. Install the power steering pump. Refer to Power Steering Pump Replacement (4.2L)  or Power Steering Pump Replacement (Except 4.2L) .
About FixVault