FixVault
Home › Jeep › 2018 › Grand Cherokee Trackhawk › Repair and Diagnosis › External Pages › Different car › Section 345 (Engine Cooling System) › Engine › Sensor, Coolant Temperature › Installation › 2.8L

Sensor, Coolant Temperature: Installation: 2.8L

WARNING: This page is about a different car, the 2016 Jeep Wrangler and 2015 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Lower Bypass Hose, EGR Cooler Supply Line & Temperature Sensor
GC0145356Courtesy of CHRYSLER GROUP, LLC
  1. Install coolant temperature sensor (4) in thermostat housing (1). Tighten sensor (4) to 11 N.m (8 ft. lbs.).
    Fig 2: Thermostat Housing
    GC0145357Courtesy of CHRYSLER GROUP, LLC
  2. Install the thermostat housing (2) onto engine. Refer to THERMOSTAT, INSTALLATION .
About FixVault