Sensor, Exhaust Pressure: Installation: 6.4L

Courtesy of CHRYSLER GROUP, LLC

1. If removed, install the Differential Pressure Sensor (DPS) metal tubing fitting (4).
2. Install the DPS (1) to the bracket.
3. Install the DPS and bracket in vehicle.
4. Install the DPS bracket bolt (1) and tighten securely.
5. Connect the DPS hose (3).
6. If equipped, Install the transmission skid plate. Refer to PLATE, SKID, TRANSMISSION .
7. Remove the support and lower the vehicle.
8. Connect the negative battery cable.