Repair Procedures: Removal
WARNING: This page is about a different car, the 2013 Kia Sportage and 2012 Kia Sportage. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) cable.
- Release the residual pressure in fuel line. Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE
".CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS after completion of "Release Residual Pressure in Fuel Line" work.
- Disconnect the injector connector (A).
- Remove the wiring harness bracket installation bolt (B).
- Remove the installation nut, and then disconnect the fuel feed tube (C).
- Remove the installation bolt (D), and then remove the delivery pipe & injector assembly from the engine.
- Remove the fixing clip (A), and then separate the injector from the delivery pipe.