FixVault

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2015 Kia Forte5 and 2015 Kia Forte Koup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Remove the air duct cleaner.

    (Refer to "AIR CLEANER ")

  3. Disconnect the solenoid valve connector (A).
    Fig 1: Solenoid Valve Connector
    G09747162Courtesy of KIA MOTORS AMERICA, INC.
  4. Measure resistance between sensor signal terminal and sensor ground terminal.
  5. Check that the resistance is within the specification.