FixVault
Home › Kia › 2018 › Sorento SX, FWD › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System - 3.3L › Camshaft Position Sensor (CMPS) › Repair Procedures › Removal › [Bank 2/Intake]

[Bank 2/Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the mounting bolt, and then vertically remove the sensor (B) from the cylinder head cover.
Fig 1: Disconnecting Camshaft Position Sensor Connector (Bank 2/Intake)
G12181497Courtesy of KIA MOTORS AMERICA, INC.
About FixVault