Rear Console Box: Disassembly
WARNING: This page is about a different car, the 2008 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE CONSOLE BOX CUP HOLDER
- Remove the console box cup holder.
- REMOVE BOX NO.1 SIDE PANEL
- Disengage the 8 claws and remove the box No. 1 side panel.
- REMOVE REAR CONSOLE BOX LOWER
- Remove the 6 screws.
- Disengage the 4 clips and the claw, and remove the rear console box lower.
- REMOVE CONSOLE BOX LIGHT SUB-ASSEMBLY
- Disconnect each of the clamp and connectors, and remove the console box light sub-assembly.
- REMOVE REAR CONSOLE BOX HOLDER CUP
- Remove the 5 screws and the rear console box holder cup.
- REMOVE CONSOLE UPPER PANEL GARNISH FRONT
- Remove the 4 screws and the console upper panel garnish front.
- REMOVE CONSOLE BOX REGISTER ASSEMBLY
- Remove the 6 screws and the console box register assembly.
- REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER
- Remove the 4 screws.
- Remove the 2 screws.
- Disengage the 2 claws.
- Disengage the 2 claws and remove the console box sub-assembly upper.
- REMOVE CONSOLE COMPARTMENT DOOR LOCK
- Remove the 2 screws and the console compartment door lock.
- REMOVE CONSOLE UPPER PANEL GARNISH REAR
- Remove the 3 screws and the console upper panel garnish rear.