FixVault
Home › Lexus › 2007 › GS 430 › Repair and Diagnosis › Restraints › Air Bag, SRS › Pre-Collision › Pre-Collision System › Data List / Active Test

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.

    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. By following the display on the tester, select the "Data List".

    Seat belt control ECU: 

    SEAT BELT CONTROL ECU CHART

    Tester Display Measurement Item/Range Normal Condition Diagnostic Note
    D BUCKLE SW Buckle switch status of driver's seat/
    UNSET: Unfasten driver side seat belt
    SET: Fasten driver side seat belt
    NG: Indeterminate data    		 UNSET / SET / NG  
    P BUCKLE SW Buckle switch status of passenger's seat /
    UNSET: Unfasten passenger side seat belt
    SET: Fasten passenger side seat belt
    NG: Indeterminate data    		 UNSET / SET / NG -
    D BELT CTRL Seat belt control status of driver's seat/
    STOP: Control stopped
    ON: Controlled
    ERROR: Indeterminate data    		 STOP / ON / ERROR Seat belt (driver side) is fastened
    P BELT CTRL Seat belt control status of passenger's seat /
    STOP: Control stopped
    ON: Controlled
    ERROR: Indeterminate data    		 STOP / ON / ERROR Seat belt (passenger side) is fastened
    #PRESENT CODES Number of present trouble codes /
    min: 0, max: 255    		 Number of DTCs will be displayed -
    #PAST CODES Number of past trouble codes /
    min: 0, max: 255    		 Number of DTCs will be displayed -
  2. PERFORM ACTIVE TEST 

    HINT:

    Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.

    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Following the display on the tester, select the "Data List".

    Seat belt control ECU: 

    SEAT BELT CONTROL ECU CHART

    Tester Display Test Part Control Range
    D BELT MOTOR Driver's seat belt motor ON: Seat belt motor operates
    OFF: Seat belt motor does not operates
    P BELT MOTOR Passenger's seat belt motor ON: Seat belt motor operates
    OFF: Seat belt motor does not operates
    D-P BELT MOTOR Driver's and passenger's seat belt motor ON: Seat belt motors operate
    OFF: Seat belt motors do not operate
About FixVault