FixVault
Home › Mitsubishi › 2002 › Galant GTZ › Repair and Diagnosis › Engine Performance › System › Engine Controls - Self-Diagnostics - 3.0L › Scan Tool Communications › No Communication With All Systems › Testing

No Communication With All Systems: Testing

  1. Turn the ignition switch to LOCK position. Using DVOM, measure voltage between ground and Data Link Connector (DLC) terminal No. 16 (Red/Black wire). If battery voltage exists, go to next step. If battery voltage does not exist, repair connectors and/or wiring between DLC and fusible link. See Figure . Recheck communication.
  2. Using DVOM, check for continuity between ground and DLC terminals No. 4 and 5 (Black wires). If continuity exists at each terminal, repair or replace scan tool as necessary. If continuity does not exist at one or both terminals, repair appropriate Black wire between ground and DLC. Recheck communication.
About FixVault