FixVault
Home › Nissan-Datsun › 2002 › Altima Base, 3.5 B › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle › On-Vehicle Service › Revolution Sensor Replacement

Revolution Sensor Replacement

  1. Disconnect electrical connector.
  2. Remove revolution sensor from A/T.
  3. Reinstall any part removed.
    • Always use new sealing parts  .
      Fig 1: Removing Revolution Sensor From A/T
      G01982489Courtesy of NISSAN MOTOR CO., U.S.A.
About FixVault