Component Inspection (Cooling Fan Motor)

1. Turn ignition switch OFF.
2. Disconnect cooling fan motor harness connector.
3. Supply cooling fan motor terminals with battery voltage and check operation.
   COOLING FAN MOTOR SPECIFICATION
   
   

   	Condition	Terminals
   		+	-
   Cooling fan motor	A	1	3 and 4
   		2	3 and 4
   		1 and 2	3
   		1 and 2	4
   	B	1, 2	3, 4

   Fig 1: Disconnecting Cooling Fan Motor Harness Connector

   Courtesy of NISSAN MOTOR CO., U.S.A.

Check that cooling fan speed of condition B is higher than that of A. 

Is the inspection result normal? 

YES: INSPECTION END

NO: Replace cooling fan motor.