FixVault
Home › Pontiac › 2004 › Aztek Base, AWD › Repair and Diagnosis › Engine Mechanical › Engine Mechanical - 3.4L › Repair Instructions › On-Vehicle Repair Instructions › Engine Oil Level Sensor and/or Switch Replacement › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Drain the oil from the oil pan.
    3. Fig 1: View Of Oil Level Sensor Electrical Connector
    GM734310Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the oil level sensor.
    4. Fig 2: Identifying Oil Level Sensor & Bolt
    GM888259Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil level sensor bolt.
  5. Remove the oil level sensor from the oil pan.
About FixVault