Installation Procedure

Fig 1: View Of KM-619, Front Control Arm With Bushing & CH-48510

Courtesy of GENERAL MOTORS CORP.

NOTE: The bushing must be lubricated with soapy water solution to ease the installation process.

NOTE: Before installing, the bushing must be properly aligned and orientated. The depth to which the bushing is going to travel must also be observed and maintained.

Using the KM-619 (1) and CH-48510 (4), install the NEW bushing (2) to the front control arm (3). See Special Tools .
Install the front control arm. Refer to Control Arm Replacement .
Install the front wheel. Refer to Tire and Wheel Removal and Installation .
Remove the safety stands.
Lower the vehicle to the ground.