Replace control module
CAUTION:
Risk of damage due to build-up of corrosion in plug connections!
This can cause malfunctions and system failures!
This can cause malfunctions and system failures!
- When removing hydraulic unit pull off plug as the last step
- Protect plug connections from fluids
- Completely remove fluids that have ingressed using suitable agents
- When installing hydraulic unit push on plug as the last step
If the control unit is damaged, the complete hydraulic unit with integrated control unit must be replaced. Observe the following points:
- The control unit must be coded for the corresponding type of transmission (manual transmission/Tiptronic).
- The Vehicle Identification Number must be entered.
- A static test and the swap test must be performed using the Porsche System Tester II 9588.