VTD Model

Press new oil seal using ST and a press.
ST 498057300 INSTALLER
Press dust cover.
Install the transfer clutch pipe onto the extension case, taking care not to deform the pipe.

Fig 1: Identifying Transfer Clutch Pipe Onto Extension Case
Apply ATF to new O-ring and install the test plug.
Tightening torque: 13 N.m (1.3 kgf-m, 9.6 ft-lb)

Fig 2: Identifying Test Plug And Extension Case
Insert the multi-plate clutch, drive plates, driven plates, and spring retainer.

Fig 3: Identifying Multi-Plate Clutch And Spring Retainer
Install the snap ring using special tools 1,2, and 3.
ST1 398673600 COMPRESSOR

ST2 498627100 SEAT

ST3 398663600 PLIERS

Fig 4: Identifying Snap Ring