Code Testing
- Integra, see: TESTS W/CODES - 4-CYL
- Legend, see: TESTS W/CODES - V6
Symptom checks are intended to direct the technician to malfunctioning component(s) so that further diagnosis may be performed. A "symptom" should lead to further testing of specific components or systems, or verification of adjustment specifications.
Use intermittent test procedures to locate intermittent driveability problems that do not occur when the vehicle is being tested. These problems may cause a noticeable driveability problem or cause the "CHECK ENGINE" warning light to illuminate.
It is also possible that certain driveability concerns have been rectified by the manufacturer through substitution of a revised calibration chip or computer control unit. Check with manufacturer for latest information on updated chips and control units.
- Integra, see: SYSTEM/COMPONENT TESTS - 4-CYL
- Legend, see: SYSTEM/COMPONENT TESTS - V6 For specifications, refer to:
- Integra, see: SPECIFICATIONS - 4-CYL
- Legend, see: SPECIFICATIONS - V6 For adjustment procedures, refer to:
- Integra, see: ADJUSTMENTS - 4-CYL
- Legend, see: ADJUSTMENTS - V6 Recommended system and component checks may not apply to all vehicles.