FixVault

Right Front Solenoid Or Power Supply

  1. Check ABS fuse No. 3. Unplug front solenoid connector. Using a DVOM, check resistance between Red and Black wires, and Yellow and Black wires of front solenoid. If resistance is not 1-3 ohms, replace faulty solenoid.
  2. If resistance is okay, disconnect control unit 5-pin connector. Check for battery voltage between White/Black wire and ground. If battery voltage is not present, repair open in the White/Black wire between fuse No. 3 and control unit. If battery voltage is present, go to next step.
  3. Check for continuity in Red/Black and Yellow/Black wires in control unit connector and ground. If no continuity exists, repair open circuit. If continuity exists, replace control unit.