Brake Pedal Height
- Loosen brakelight switch lock nut and back off switch until it no longer touches brake pedal. Loosen brake pedal push rod lock nut and screw push rod in or out until pedal height from floor is to specification. See BRAKE PEDAL HEIGHT SPECIFICATIONS table. Tighten lock nut.
- Screw in brakelight switch until plunger is fully pressed (threaded end touching pad on pedal arm). Back off switch 1/2 turn and tighten lock nut firmly. Ensure brakelights work when brake pedal is pressed.
BRAKE PEDAL HEIGHT SPECIFICATIONS
| Application | In. (mm) | |
|---|---|---|
| Integra | ||
| A/T | 6.3 (160) | |
| M/T | 6.1 (155) | |
| Legend | 8.4 (213) | |
| Vigor | ||
| A/T | 7.6 (194) | |
| M/T | 7.8 (199) | |