FixVault
Home › Acura › 1992 › Integra GS-R › Repair and Diagnosis › Engine Performance › System › Engine Controls - Basic Testing › Ignition Checks › Electronic Ignition System › Ignition Coil Test (Legend)

Ignition Coil Test (Legend)

  1. Turn ignition off. Remove ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" of ignition coil. See Fig 1 .
  2. Resistance should be .9-1.1 ohms at 77°F (25°C). Replace coil if resistance is not within specification. Resistance value for secondary winding is not available.
    IGNITION COIL RESISTANCE (LEGEND)

    Application Ohms @ 77°F (25°C)
    Primary .9-1.1
    Secondary N/A
    Fig 1: Testing Ignition Coil (Legend)
    G91G16283Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault