Pistons, Pins & Rings Specifications
WARNING: This page is about a different variant/trim than selected.
PISTONS, PINS & RINGS
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| Pistons | |||||
| Clearance | |||||
| Standard | 0.0004-0.0014 (0.010-0.035) | ||||
| Service Limit | 0.0020 (0.050) | ||||
| Diameter (1) | |||||
| Standard | 3.1882-3.1886 (80.980-80.990) | ||||
| Service Limit | 3.1878 (80.970) | ||||
| Oversize 0.010" (0.25 mm) | 3.1980-3.1984 (81.230-81.240) | ||||
| Pins | |||||
| Diameter | 0.8265-0.8268 (20.994-21.000) | ||||
| Piston Fit | 0.0004-0.0009 (0.010-0.022) | ||||
| Rod Fit | 0.0005-0.0013 (0.013-0.032) | ||||
| Rings | |||||
| No. 1 | |||||
| End Gap | 0.008-0.014 (0.20-0.35) | ||||
| Side Clearance | 0.0018-0.0028 (0.045-0.070) | ||||
| No. 2 | |||||
| End Gap | 0.016-0.022 (0.40-0.55) | ||||
| Side Clearance | 0.0018-0.0028 (0.045-0.070) | ||||
| No. 3 (Oil) | |||||
| End Gap | 0.008-0.020 (0.20-0.50) | ||||
|
|||||