Specifications & Procedures: Inspection: RUNOUT

Jack up the vehicle and raise the wheels off the ground. Place the dial gauge on each front and rear wheel rim, turn the wheel slowly by hand. Check the axial and radial runout for front/rear wheel.

Fig 1: Front And Rear Wheel Axial Runout

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Front And Rear Wheel Radial Runout

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Turn the wheel slowly by hand and check for excessive axial and radial runout.

Replace the wheel bearing with new one if the service limit is exceeded.