Power Mirror Switch Test
Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Check for continuity between specified switch terminals with switch in each position. If continuity is not as specified, replace switch. See Fig 1 . See POWER MIRROR SWITCH CONTINUITY TEST table.
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminal Numbers | |||
|---|---|---|---|---|
| Motor Switch - Right Mirror | ||||
| Off | 3-5-6-10 | |||
| Up | 3-6-10; 5-9 | |||
| Down | 3-6-9; 5-10 | |||
| Left | 5-6-9; 3-10 | |||
| Right | 3-9 | |||
| Motor Switch - Left Mirror | ||||
| Off | 4-5-7-10 | |||
| Up | 5-9; 4-7-10 | |||
| Down | 4-7-9; 5-10 | |||
| Left | 5-7-9 | |||
| Right | 4-9; 5-7-10 | |||
| Defogger Switch | ||||
| On | (1) 1-9-10 | |||
| Off | 9-10 | |||
|
||||