Left Mirror Inoperative
- Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Turn ignition on. Using jumper wires, connect Black/Yellow wire to Yellow/Red wire, and either the Yellow/White or Yellow/Black wire to ground.
- If mirror does not tilt down (or swing left), check for open in Yellow/White or Yellow/Black wire between mirror switch and mirror. If mirror doesn't move at all, check Yellow/Red wire. If wiring is okay, test mirror motor. See POWER MIRROR MOTOR TEST. If mirror operates correctly, test mirror switch. See POWER MIRROR SWITCH TEST.
- Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Using jumper wires, connect Black/Yellow(2) wire to Blue/Green wire, and either the Blue/White or Blue/Black wire to ground. Turn ignition on for 2 seconds, then off.
- If mirror does not tilt down (or swing left), check for open in Blue/White or Blue/Black wire between mirror switch and mirror. If mirror doesn't move at all, check Blue/Green wire. If wiring is okay, test mirror motor. See POWER MIRROR MOTOR TEST. If mirror operates correctly, test switch. See POWER MIRROR SWITCH TEST.
- Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Turn ignition on. Using jumper wires, connect Yellow/Black(1) wire to Yellow/Black(2) wire, and either the Blue/White or Yellow/Red wire to ground.
- If mirror does not tilt down (or swing left), check for open in Blue/White or Yellow/Red wire between mirror switch and mirror. If mirror doesn't move at all, check Yellow/Black(2) wire. If wiring is okay, test mirror motor. See POWER MIRROR MOTOR TEST. If mirror operates correctly, test mirror switch. See POWER MIRROR SWITCH TEST.