FixVault
Home › Acura › 1996 › NSX Standard › Repair and Diagnosis › Body & Frame › Power Windows › Component Tests › Passenger's Motor Test

Passenger's Motor Test

  1. Remove the door panel.
  2. Disconnect the 2-P connector from the motor.
    3. CAUTION: When the motor stops running, disconnect one lead immediately.
  3. Test the motor by connecting battery power to the No. 1 terminal and ground to the No. 2 terminal. See Fig 1 . Test the motor in each direction, by switching the leads.
  4. If the motor does not run, replace it.
Fig 1: Testing Passenger's Motor
G00092284Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault