Power Seat Switch Test
Remove power seat switch. Disconnect power seat switch connectors. Using an ohmmeter, verify continuity is as specified. See POWER SEAT SWITCH CONTINUITY table. See Fig 1 . If switch fails any test, replace faulty switch.
POWER SEAT SWITCH CONTINUITY
| Position | Terminals | |
|---|---|---|
| Slide Switch | ||
| Forward | A6 & B5 | |
| Backward | A6 & B1 | |
| Recline Switch | ||
| Forward | A2 & A3 | |
| Backward | A2 & A4 | |
| Front Up-Down Switch | ||
| Up | A6 & B3 | |
| Down | A6 & B4 | |
| Rear Up-Down Switch | ||
| Up | A2 & B2 | |
| Down | A2 & B6 | |