Actuator Assembly
- Disconnect 4-pin connector at actuator. Actuator is located on left side of engine compartment. Ensure output linkage moves smoothly. Using a fused jumper wire, connect terminal "D" of actuator connector to battery voltage. Using another jumper wire, connect terminal "A" of actuator connector to ground. See Fig 1
.
- Listen for clicking sound from clutch, and locked output linkage. If actuator output linkage is not locked, replace actuator. Check actuator motor operation in each output linkage position. See Fig 1
. If actuator motor operates as specified, it is operating properly. Replace actuator motor if it does not operate as specified.
Courtesy of AMERICAN HONDA MOTOR CO., INC.