Hydraulic System Bleeding
WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
DO NOT spill brake fluid on painted surfaces. To avoid paint damage, clean any spilled brake fluid with a clean cloth and clear water, immediately.
Fill master cylinder with clean brake fluid. Fluid should meet DOT 3 or DOT 4 specifications. Bleed brake calipers in following sequence: LF, RF, RR, LR. Have someone slowly pump brake pedal several times, then apply steady pressure. Loosen bleed screw to allow air to escape system. Tighten bleed screw to specification. See TORQUE SPECIFICATIONS . Recheck fluid level.