Starter Solenoid Test

WARNING: This page is about a different car, the 1999 Acura 3.0CL and 1999 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.

Check starter solenoid for continuity between terminal "S" and armature housing (ground). See Fig 1 and Fig 2 . Check continuity between terminals "S" and "M". Continuity should exist. If continuity does not exist, replace solenoid.

Fig 1: Identifying Solenoid Terminals (2.3CL With M/T)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Identifying Solenoid Terminals (2.3CL With A/T & 3.0CL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.