FixVault
Home › Acura › 1998 › Integra GS-R, 4D Sedan › Repair and Diagnosis › External Pages › Different car › Section 52 (Anti-Lock Brake System) › Self-Diagnostics › DTC 8-1: Abs Function

DTC 8-1: Abs Function

WARNING: This page is about a different car, the 1997 Acura 3.5RL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Test drive vehicle 12 MPH or more for at least 2 minutes. If ABS indicator light goes out, go to next step. If ABS indicator light stays on, verify DTC. If a code other than DTC 8-1 sets, see appropriate DTC. If DTC 8-1 resets, replace ABS control unit.
  2. System has returned to normal. Check for loose wheel speed sensor connectors and for proper installation of wheel speed sensors. If wheel speed sensors and connectors check okay, probable cause was driving over rough roads.
About FixVault