Main Switch: 3.2TL
Remove fog light/cruise control main switch from driver's switch panel. Disconnect switch 8-pin connector. With switch in OFF position, continuity should exist between terminal No. 1 (Red/Black wire) and terminal No. 2 (Red wire), and between terminal No. 4 (Light Green wire) and terminal No. 7 (Black wire). See Fig 1 .
With main switch in ON position, continuity should exist between main switch terminal No. 1 (Black wire) and terminal No. 2 (Light Green wire), and between terminal No. 4 (Light Green wire), terminal No. 5 (Black/Yellow wire) and terminal No. 7 (Black wire). See WIRING DIAGRAMS . If continuity is not present as specified, replace foglight/cruise control main switch.