Passenger's Power Window Switch Test
Remove passenger's power window switch and armrest pocket from door panel. Disconnect 6-pin connector (8-pin connector on 3.5RL) from switch. Check for continuity between specified switch terminals with switch in each specified position. See Fig 1 or Fig 2 . See PASSENGER'S POWER WINDOW SWITCH TEST table. If continuity is not as specified, replace passenger's power window switch.
PASSENGER'S POWER WINDOW SWITCH TEST
| Window Switch Position | Continuity Between Terminals No. | ||
|---|---|---|---|
| 3.2TL | |||
| Front, Right Rear & Left Rear | |||
| UP | 1 & 2; 3, 4, 5 & 6 | ||
| OFF | 1, 3, 4, 5 & 6 | ||
| DOWN | 1, 3, 5 & 6 | ||
| 3.5RL | |||
| Front, Right Rear & Left Rear | |||
| UP | 3 & 5; 4 & 6 | ||
| OFF | 1, 3, 7 & 8; 4 & 6 | ||
| DOWN | 3 & 5; 4 & 6 | ||