Lock-up Control
From sensor input signals, the PCM determines whether to turn the lock-up ON or OFF, and activates lock-up control solenoid valve A and/or B accordingly. The combination of driving signals to lock-up control solenoid valves A and B and the linear solenoid pressure is shown in the table below.
LOCK-UP CONTROL SOLENOID VALVE CONDITION CHART
| Lock-up Conditions | Lock-up Control Solenoid Valve A | Lock-up Control Solenoid Valve B | Linear Solenoid Pressure |
|---|---|---|---|
| Lock-up OFF | OFF | OFF | High |
| Lock-up, Half | ON | Duty operation OFF ↔ ON | Low |
| Lock-up, Full | ON | ON | High |
| Lock-up during deceleration | ON | Duty operation OFF ↔ ON | Low |