FixVault

Traction Control System (TCS)

WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect main switch 8-pin connector. With switch in OFF position, continuity should not exist between switch terminals No. 5 and No. 6. See Figure. Go to next step.
  2. With main switch in ON position, continuity should exist between switch terminals No. 5 and No. 6. See WIRING DIAGRAMS . If continuity is not present as specified, replace TCS/cruise control main switch.