Anti-Theft System Indicator Light
WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
Remove door panel. See DOOR PANEL under REMOVAL & INSTALLATION. Disconnect anti-theft system indicator light 2-pin connector. Using jumper wires, momentarily apply battery voltage to anti-theft system indicator light connector terminal No. 2 (White/Yellow wire or White wire), and apply ground to terminal No. 1 (Red/Blue or Red wire). Observe anti-theft system indicator light. Replace anti-theft system indicator light if it does not illuminate.