Reverse Relay: 3.5RL

Remove reverse relay from underhood relay block "C". Underhood relay block "C" is located in left front of engine compartment. Check for continuity between terminals No. 1 and 4. See Fig 1. Continuity should exist. Using jumper wires, connect terminal No. 3 to battery voltage and terminal No. 5 to ground. Check for continuity between terminals No. 1 and 2. Continuity should exist. If continuity does not exist between terminals as specified, replace reverse relay.

Fig 1: Identifying Reverse Relay Terminals (3.5RL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.