FixVault
Home › Acura › 2001 › 3.2TL › Repair and Diagnosis › Engine Mechanical › Mechanical › 3.2L V6 Engine › Testing › Oil Pressure Switch

Oil Pressure Switch

  1. Remove the YEL/RED wire (A) from the engine oil pressure switch (B). See Fig 1.
  2. Check for continuity between the positive terminal (C) and the engine (ground). There should be continuity with the engine stopped. There should be no continuity with the engine running.
Fig 1: Removing YEL/RED Wire From Engine Oil Pressure Switch
G00298132Courtesy of AMERICAN HONDA MOTOR CO., INC.
About FixVault