Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK
| Application |
In. (mm) |
| Cylinder Bore |
| Standard Diameter |
3.189-3.190 (81.00-81.02) |
| Service Limit |
3.192 (81.07) |
| Maximum Taper |
0.002 (0.05) |
| Maximum Re-bore Limit |
0.010 (0.25) |
| Deck Warpage |
| Maximum |
0.003 (0.08) |
| Service Limit |
0.004 (0.10) |