FixVault
Home › Acura › 2001 › Integra GS-R, 4D Sedan › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (1.8L 4-CYL) › Overhaul › Cylinder Block Assembly › Piston Pin Installation

Piston Pin Installation

WARNING: This page is about a different variant/trim than selected.
  1. Ensure piston and connecting rod are positioned as shown in illustration. See Figure. Turn handle on Piston Pin Driver (07973-PE00320) so piston driver length is 1.957" (49.71 mm).
  2. Install Pilot Collar (07LAF-PR30100) into piston and connecting rod. Lightly lubricate new piston pin. Place piston onto base. Press in piston pin.
About FixVault