FixVault
Home › Acura › 2002 › RSX Base, Automatic › Repair and Diagnosis › Engine Performance › System › PGM-FI System › Knock Sensor Replacement › K20A3 engine

K20A3 engine

  1. Remove the intake manifold (see INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the knock sensor 1P connector.
  3. Remove the knock sensor (A).
    Fig 1: Removing Knock Sensor And Torque Specifications
    G03650905Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the sensor in the reverse order of removal.
About FixVault