FixVault
Home › Acura › 2002 › RSX Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › 3rd Clutch Transmission Fluid Pressure Switch Replacement

3rd Clutch Transmission Fluid Pressure Switch Replacement

  1. Disconnect the connector from the 3rd clutch transmission fluid pressure switch (A).
    Fig 1: Disconnecting Connector From 3rd Clutch Transmission Fluid Pressure Switch And Torque Specifications
    G03651857Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the 3rd clutch transmission fluid pressure switch, then install a new one with a new sealing washer (B). Tighten the switch to the specified torque.
  3. Reconnect the connector, making sure there is no water, oil, dust, or foreign particles inside the connector.
About FixVault