Overrunning Clutch

NOTE: Be careful not the damage the planetary gear shaft when striking the pipe.

Put the end of a pipe (inner diameter .51" (13 mm)) against the pinion stop, and strike the pipe to force the pinion stop over the spring clip. See Fig 1 .
Remove the spring clip, pull the pinion stop and overrunning clutch off the shaft. See Fig 2 .

Fig 1: Moving Pinion Stop Over Spring Clip

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Removing Spring Clip

Courtesy of AMERICAN HONDA MOTOR CO., INC.