Rear Climate Control Panel Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in this area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before doing repairs or service.

Remove the HVAC trim (see CENTER CONSOLE REAR TRIM REMOVAL/ INSTALLATION ).
Remove the self-tapping screws and the rear climate control panel (A).

Fig 1: Identifying Rear Climate Control Panel
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the control panel in the reverse order of removal. After installation, operate the various functions to see whether works properly.
Run the self-diagnostic function to confirm that there are no problems in the system (see HOW TO USE THE SELF-DIAGNOSTIC FUNCTION WITHOUT THE HDS ).